For fine cuts in laminated board materials on both sides with melamine, formica, veneer, etc. On table saws without scoring unit, vertical panel sizing saws, radial arm saws, mitre-and chop saws. Extra hard sub-micro grain carbide tips for long edge life.
Saw blade diameter: 10 – 14 inch
Kerf: .126 – .148 inch
Plate: .087 – .118 inch
Bore: 5/8 – 1 inch
Number of teeth: 80 – 100
Reference Number | D | B | b | d | Z | H |
---|---|---|---|---|---|---|
17-010 001 080 | 10” | .126” | .087" | 5/8” | 80 | 5° neg. |
17-012 002 096 | 12” | .126” | .087" | 5/8” | 96 | 5° neg. |
17-014 002 100 | 14” | .148” | .118" | 5/8” | 100 | 2° neg. |
17-220 030 064 | 220 mm | 3.2 mm | 2.2 mm | 30 mm | 64** | 5° neg. |
17-250 030 080 | 250 mm | 3.2 mm | 2.2 mm | 30 mm | 80* | 5° neg. |
17-303 030 096 | 303 mm | 3.2 mm | 2.2 mm | 30 mm | 96* | 5° neg. |
D = Saw blade diameter
B = Kerf
b = Plate
d = Bore
Z = Number of Teeth
H = Hook
Diameter and pitch circle of any pinholes must be provided when ordering! We manufacture all order-based circular saw blades with a minimum quantity of 30 pieces per size. We reserve the right to make technical changes.
* 2 combi pin holes
** 2 pin holes 7/42mm
- ATB
- Wood
- Plastic
- Composite Materials