For the best sizing and finishing, cuts in plywood, veneer, plastic laminated board material, on table saws and vertical sizing saws.
Saw blade diameter: 8 – 18 inch
Kerf: .110 – .180 inch
Plate: .070 – .134 inch
Bore: 5/8 – 1 inch
Number of teeth: 40 – 100
S-Line: (8.0mm tip length)
Saw blade diameter: 10 inch
Kerf: .126 inch
Plate: .087 inch
Bore: 5/8 – 1 inch
Number of teeth: 40 – 60
Reference Number | D | B | b | d | Z | H |
---|---|---|---|---|---|---|
13-008 001 040 | 8” | .110” | .070” | 5/8” | 40 | 15° |
13-008 001 060 | 8” | .118” | .078” | 5/8” | 60 | 10° |
13-010 001 040 | 10” | .126” | .087” | 5/8” | 40 | 15° |
13-010 001 060 | 10” | .126” | .087” | 5/8” | 60 | 15° |
13-010 001 080 | 10” | .126” | .087” | 5/8” | 60 | 15° |
13-012 002 060 | 12” | .126” | .087” | 1” | 60 | 10° |
13-012 002 072 | 12” | .126” | .087” | 1” | 72 | 10° |
13-012 002 100 | 12” | .135” | .095” | 1” | 100 | 5° |
13-014 002 060 | 14” | .155” | .110” | 1” | 60 | 10° |
13-014 002 080 | 14” | .150” | .109” | 1” | 80 | 5° |
13-014 002 100 | 14” | .150” | .109” | 1” | 100 | 5° |
13-016 002 080 | 16” | .155” | .110” | 1” | 80 | 15° |
13-018 002 080 | 18” | .180” | .134” | 1” | 80 | 10° |
13-018 002 100 | 18” | .180” | .134” | 1” | 100 | 10° |
13-220 030 064 | 220 mm | 3.2 mm | 2.2 mm | 30 mm | 64** | 10° |
13-250 030 080 | 250 mm | 3.2 mm | 2.2 mm | 30 mm | 80* | 5° |
13-300 030 060 | 300 mm | 3.2 mm | 2.2 mm | 30 mm | 60* | 10° |
13-300 030 072 | 300 mm | 3.2 mm | 2.2 mm | 30 mm | 72* | 10° |
13-350 030 084 | 350 mm | 3.2 mm | 2.2 mm | 30 mm | 84* | 10° |
14-010 001 040¹ | 10” | .126” | .087” | 5/8” | 40 | 15° |
14-010 002 040¹ | 10” | .126” | .087” | 1” | 40 | 15° |
14-010 001 060¹ | 10” | .126” | .087” | 5/8” | 60 | 10° |
14-010 002 060¹ | 10” | .126” | .087” | 1” | 60 | 10° |
D = Saw blade diameter
B = Kerf
b = Plate
d = Bore
Z = Number of Teeth
H = Hook
Diameter and pitch circle of any pinholes must be provided when ordering! We manufacture all order-based circular saw blades with a minimum quantity of 30 pieces per size. We reserve the right to make technical changes.
1 S-Line (8.0 mm tip length)
* 2 combi pin holes
** 2 pin holes 7/42mm
- TC
- Wood
- Plastic
- Composite Materials